The main driving parts of the belt conveyor are the conveyor belt, the roller and the idler. The inter-relationship of the various parts affects each other. The failure of any part itself will cause other parts to fail over time, thereby reducing the performance of the conveyor and shortening The life of transmission parts. What should I do for daily maintenance?

1. Timely inspection and maintenance

When the conveyor belt is slack on the drum and slips, the tensioning force is adjusted through heavy hammer tensioning, spiral tensioning, hydraulic tensioning and other devices. However, when the conveyor belt is deformed, the tensioning stroke is not enough, and a section of the conveyor belt can be cut off and vulcanized again.

When debris such as water, coal slime or dirty oil appears on the surface of conveyor belts, rollers and rollers, they should be cleaned up in time to keep the surface of the transmission parts dry. If the environment is humid, rosin powder can be added to the rollers to prevent slipping.

When the surface of the conveyor belt is cracked, the rubber surface of the roller is damaged, or the idler is not working properly or damaged, it should be repaired or replaced in time, and the bearing lubricant should be cleaned and filled regularly. Work cannot continue to prevent greater failure or accidents.

2. The transmission parts are qualified and the technology meets the requirements

The quality of transmission parts such as conveyor belts, rollers and idlers should be qualified, and no work failure caused by the manufacturing errors of the rollers should occur. The installation and maintenance process of belt conveyor parts meets the requirements, and the error cannot exceed the standard. Conveyor operation should be stable to prevent overload or impact load.

In actual production, it is necessary to strictly implement the belt conveyor operation, inspection and maintenance systems, carefully analyze and judge the faults found, perform timely maintenance, avoid major accidents, and extend the transmission of conveyor belts, rollers and idlers. The service life of parts improves production efficiency.